Advanced Settings For Vpn Configurations - SonicWALL Internet Security Appliances Administrator's Manual

Advanced Settings for VPN Configurations

The following table lists the available settings for each VPN configuration. The boxes checked are
applicable to the given configuration mode.
Enable Keep Alive
Try to bring up all possible
SAs
Require authentication of
VPN clients using XAUTH
Require authentication of
local users
Require authentication of
remote users
Enable Windows
Networking (NetBIOS)
broadcast
Apply NAT and Firewall
Settings
Forward Packets to Remote
VPNs
Enable Perfect Forward
Secrecy
Phase 2 DH Group
Default LAN Gateway
Terminate VPN on the LAN,
DMZ or LAN/DMZ
*Default LAN Gateway and Forward Packets to Remote VPN are not configured for VPN Client to SonicWALL appliance connections using
Manual Key Exchange.
1
These parameters apply to both SonicWALL Certificates and Third Party Certificates.
Group VPN Group VPN
using IKE/Pre- using IKE/
shared Secret Certificates
IKE using Pre-
Manual Key*
shared Secret
IKE using
Certificates
1
SonicWALL VPN Page 191