Table of Contents
Advertisement
Free Mixers
FREE MIXER
>MIXER:
FROM CHANNEL:
TO CHANNEL:
TRIM:
TRV - :
+100%
TRV + :
+100%
Flying, Assembling and Experimenting with the Vector Unit
Ground ideas
16 / 20
Note
Make sure previously programmed mixer functions (in the "Wing
mixers" or "Free mixers" menu of the HoTT transmitter) do not over-
lap with these menu options.
< >
1
MIXER:
1
Up to five mixers can be contemporaneously programmed.
6
Switch between each mixer in the MIXER line of the menu
+0%
screen.
Settings only affect the mixer selected in this line.
FROM CHANNEL:
The signal source (or source channel) is mixed in to the target
channel (TO CHANNEL) with programmable values. The
method of setting up the values is analogous to the "Free Mix-
ers" menu in HoTT transmitters. Refer to the transmitter's man-
ual for additional information.
The Vector unit has been developed for simple free-flight airplane
models.
The Vector unit has been launched in tandem with specially-de-
signed Vector Planes (e.g. LEO No.13301). The gliders are not
intended for flying as remote controlled models, but can be con-
trolled as such so long as their weight does not exceed 50g.
Foam launch gliders.
Rubber motor models.
Small balsa models.
Everything which an RC model fan can conceive
34001_HB_V1
Advertisement
Table of Contents
