Advertisement
Table of Contents
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Thrane&Thrane Explorer 527
Summary of Contents for Thrane&Thrane Explorer 527
- Page 1 EXPLORER ® GETTING STARTED...
-
Page 3: Getting Started
GETTING STARTED Congratulations on the purchase of your EXPLORER 527 system. The EXPLORER 527 system comprises two main parts: the TT-3734A transceiver with accessories and the TT-5053A antenna. Before you start, please check that the following items are present: • EXPLORER 527 transceiver •... -
Page 4: Connect The Cables
Mount the EXPLORER 527 transceiver ® The EXPLORER 527 transceiver fits in a 19” rack. Use the Mounting brackets to mount the transceiver e.g. in your vehicle. You can attach the Mounting brackets in two different positions on the EXPLORER 527 transceiver, allowing the transceiver to be mounted on top of a surface or in a rack. - Page 5 When you have connected the antenna to the transceiver and started up the EXPLORER 527, the antenna starts searching for a BGAN satellite signal. When the PIN is entered, the EXPLORER 527 attempts to register on the BGAN network. The Antenna indicator shows the status as follows: •...
- Page 6 Enter the display menu system and select SETTINGS > SATELLITE. b. Select the satellite you want to use. Note that if you select a specific satellite the EXPLORER 527 will only search for the selected satellite. If you are outside coverage of that satellite, the EXPLORER 527 will not be able to register on the BGAN network.
-
Page 7: Choosing An Interface For Data Connection
MAKING A CALL TO THE EXPLORER ® To make a call to a phone connected to the EXPLORER 527, dial +870 <mobile number> + is 00 for Europe and many other countries. NOTE: There are two voice numbers, one for 3.1 kHz Audio and one for Standard voice. - Page 9 Thrane & Thrane A/S • info@thrane.com • www.thrane.com...
Need help?
Do you have a question about the Explorer 527 and is the answer not in the manual?
Questions and answers