Dsp Latency Display - Yamaha RIVAGE PM Series Supplemental Manual

DSP latency display

DSP latency display
Latency values based on the Delay Compensation setting inside the DSP engine are now displayed.
DELAY COMPENSATION popup window
This popup window indicates the values of signal latency (msec) occurring during the route from
the DSP engine through inputs to each bus output. The more the Delay Compensation is applied,
the higher the latency values will result. The values also vary depending on the Fs (sampling
frequencies).
MIX .............................Latency from INPUT to MIX OUT
STEREO......................Latency from INPUT to STEREO OUT
MATRIX .....................Latency from INPUT to MATRIX OUT
These values do not include the A→D, D→A or network latency.
Improved RTA display
A new OFFSET knob and a linear display enable you to identify even a soft audio signal.
RTA popup window
1
OFFSET knob
Specifies the offset value for the RTA display.
24
CONTENTS
1
RIVAGE PM series V3 Supplemental Manual