Input Ratings; Live Circuits - Delta Elektronika ES 030-10 Product Manual

DELTA ELEKTRONIKA BV ES030-10
Fuses
Fuses must be changed by authorized Delta Elektronika service personnel only, for continued protection against
risk of fire.

Input Ratings

Do not use an AC Supply which exceeds the input voltage and frequency rating of this instrument. The input
voltage and frequency rating of the Delta Elektronika power supply series are stated in de accompanying
datasheet.

Live Circuits

Operating personnel must not remove the instrument cover. No internal adjustment or component replacement is
allowed by non Delta Elektronika qualified personnel. Never replace components with the power cable
connected. To avoid injuries, always disconnect power, discharge circuits and remove external voltage sources
before touching components.
Parts Substitutions & Modifications
Parts sub sti tu tions and mod i fi ca tions are al lowed by au tho rized Delta Elektronika ser vice per son nel only. For
re pairs or mod i fi ca tions the unit must be re turned to a Delta Elektronika ser vice facility.
Removal of (safety) covers
Safety cover(s) are used to cover potentially hazardous voltages.
Observe the following when removing safety cover(s):
- Switch off the unit.
- Disconnect the unit from the mains supply.
- Wait for 3 minutes to allow internal capacitors to discharge.
- Unscrew the screws and remove the cover(s).
- Always place the cover(s) back before connecting the unit to the mains supply again.
Page 2 - 2 SAFETY INSTRUCTIONS Rev. Sept. 2012