Assembly Of Etude Tm - Invacare Etude User Manual

All the mattress supports can be combined with these 4 available types of bed ends:
BED ENDS BASIC (Ordered and delivered as a pair of bed ends)
ETUDE.000C1.XX 1 PAIR BASIC BED ENDS, 40-80 cm (33-73) cm
BED ENDS CLASSIC (Ordered and delivered as 1 pcs. of bed end)
ETUDE.000E1.XX 1 PCS. CLASSIC BED END, 40-80 cm
ETUDE.000F1.XX 1 PCS. CLASSIC BED END LOW HEIGHT, 30-70 cm
ETUDE.000G1.XX 1 PCS. CLASSIC EXTRA LOW, 19-9 cm
XX is colour code.
For standard light grey (RAL 7032) .21 is to be used for bed ends and .20 for mattress support.
Example:
ETUDE.000E1.21 (1 Etude Classic bed end in light grey)
ETUDE.EE100.20 (1 Etude 4 - sect. mattress support in light grey)
3. Assembly of Etude
(Illustration 2a, 2b+c, 2d)
a) Mattress Support
• Place the two inserts in the head end of the mattress support. The inserts must be mounted in such a way that
one extends further out of the side tube than the other.
• Loosely screw in the two thumb screws.
• Push the foot end of the mattress support onto the two inserts.
• Tighten with two thumb screws.
•
Retighten the two thumb screws at the head end of the top frame.
• Turn the two mattress handles of the backrest up.
• Turn the handle of the leg section up.
b) Etude Basic
• Turn the locking rings*) on the bed ends to the position "open".
• Latch the mattress support to the bed ends and press firmly into position.
• Turn the locking rings to the position "locked".
c) Etude Classic
• Release the quick locks*) on the bed ends.
• Latch the mattress support to the bed ends and press firmly into position.
• Turn the quick locks to the position "locked".
*) The locking rings/quick locks ensure that the mattress support is not accidentally lifted clear of the bed ends.
d) Control Box
The control box is latched to the backrest motor.
The control box is provided with a label with symbols showing where to connect the motors' plugs.
• Backrest motor.
• Thigh section's motor.
• Bed end.
• Bed end.
• Hand control.
Wiring (Also see the pictures in section 19)
Attention!
In order to prevent the cables from being torn apart when activating the motors it is critical that
you follow the instructions below
TM
9