Wiring - Invacare Etude User Manual

19. Wiring

1. Assemble the bed and connect the 230 V mains plug
to the control box.
3. Raise the bed to the top position.
. 4 - sec. bed: The plug of the thigh motor must be
directed through the opening of the supporter for the
motor and then connected to the control box.
Cable number: 0277011-120.
2. Connect the bed end motor cables (head and foot
end) to the control box. The cables must hang loose.
Cable number: 02770-10-120.
4. Place the foot end motor cable in the hook by the
foot end. The backrest must be in a horizontal
position.
. Place the head end motor cable in the four hooks
by the head end.
21