Assembly, Maintenance And Adjustment Sections - For Dealers Only; Overview Of Procedures; Receiving; Unpacking - Invacare IVC Series Owner's Operator And Maintenance Manual

ASSEMBLY, MAINTENANCE AND ADJUSTMENT SECTIONS - FOR DEALERS ONLY

ASSEMBLY, MAINTENANCE AND
ADJUSTMENT SECTIONS -
FOR DEALERS ONLY
WARNING
The procedures in the following sections MUST be performed by a qualified
technician.

Overview of Procedures

Receiving

Unpacking

❑ Unpacking the Bed Ends
❑ Unpacking Foot and Head Spring Sections

Set-Up

❑ Assembling the Head and Foot Spring Sections
❑ Assembling the Spring Fabric
❑ Adjusting and Reconnecting the Head Section Pull Tube
❑ Installing the Casters
❑ Assembling the Universal Bed Ends
❑ Assembling the Drive Shaft
❑ Inspecting the Bed
❑ Installing/Removing the Cable Lock
❑ Installing the Manual Crank for Hi/Lo Function
❑ Installing/Removing the Pendant

Storing the Beds

™ 20
IVC Bed Series Part No 1114836