Replacing The Power Supply - Cisco TelePresence Server 7010 Getting Started

Replacing the power supply

Only replace the power supply under the guidance of Cisco customer
!
support.
The power supply will be installed when you receive your Cisco TS 7010. To replace
the power supply:
1 Remove the power cable from the unit to disconnect the power.
2 Push the power supply latch to the right and grip the handle firmly. Pull the
power supply to remove it.
3 Insert the replacement power supply so that the latch is at the bottom left.
4 Push the power supply firmly into the unit until the latch engages.
5 Reconnect the power cable.
Figure 3: Replacing the power supply
Replacing the power supply
13