4.17 terminal
4.17.1 terminal length
Command:
terminal length <0-512>
<0-512>
Number of lines on screen (0 for no pausing)
Default:
The default length is 24.
Usage Guide:
To use this command to set the number of lines to display on the screen.
Example:
set the number of lines to display on the screen to 30
To
Switch # terminal length 30
4.17.2 terminal monitor
Command:
terminal (no) monitor
Default:
N/A
Usage Guide:
use this command to enable or disable the display of the log and debug outputs on a terminal.
To
Example:
enable the display of the log and the debug outputs on a terminal.
To
Switch # terminal monitor
.
-96-
Command Guide