Erase; Exit - Planet Networking & Communication GS-2240-48T4X Command Manual

4.9 erase

4.9.1 erase
Command:
erase {file | private-config | startup-config}
file The file on flash
private-config Erase configuration in NV memory
startup-config Erase configuration in NV memory
Default:
None
Usage Guide:
To erase data of Flash
Example:
To erase startup-config to default factory configuration(Factory Reset)
Switch # erase startup-config
erase startup-config? (y/n): y

4.10 exit

4.10.1 exit
Command:
exit
exit Exit from EXEC mode
Default:
None
Usage Guide:
To exit EXEC mode
Example:
To exit EXEC mode
Switch # disable
-75-
Command Guide