Table of Contents
Advertisement
Accessories
8.7 Door-coupling rotary operating mechanism of the 8UD1 series
Adjust the tongue and groove connection on the coupling driver
1. Remove the bolt from the direct operating mechanism (press against it from the inside).
Use a tool, such as a screwdriver.
2. Mount outside at the desired position.
Turn the bolt back into the direct operating mechanism at one of the three other possible
positions.
8.7.5
Accessories for the 8UD1 series
8.7.5.1
Handles
The handles are also available without extension shafts and without coupling drivers with the
inscription I-0-II in the colors gray and red/yellow.
transfer switching
1, 2
3
92
Suitable for
Handle length
(mm)
equipment
in size
55.0
100.0
Suitable for
shafts
(mm x mm)
8.0 x 8.0
Gray
Red/Yellow
8.0 x 8.0
Gray
Red/Yellow
3KC0 manual transfer switching equipment
Version
Article number
8UD1731-2AE01
8UD1731-2AE05
8UD1841-2AE01
8UD1841-2AE05
Manual, 09/2018, L1V30368969105-01
Advertisement
Table of Contents
