Padlocking - Siemens SENTRON 3KC0 Manual

Accessories
8.7 Door-coupling rotary operating mechanism of the 8UD1 series
8.7.4.3

Padlocking

Padlocking in position 0 (OFF)
You can lock the 8UD1 in position 0 using a padlock.
When the handle is locked, you can neither switch the 3KC0 nor open the cabinet door. You
cannot override padlocking with one padlock.
You can use up to 3 padlocks with a shackle diameter of 4.5 to 9.5 mm simultaneously for
locking the rotary operating mechanism.
Padlocks are not included in the scope of supply.
Padlocking in position I or II
The 8UD1 can be modified such that it can be locked in any position using padlocks.
Note
This modification is not reversible.
Padlocking in position I or II is only possible when the handle is not fitted to the cabinet door.
If you wish to attach the padlock in position I or II, you must do so before you fit the handle.
88
3KC0 manual transfer switching equipment
Manual, 09/2018, L1V30368969105-01