Connecting Transfer Switching Equipment Sizes 1 And 2 To The Circuit - Siemens SENTRON 3KC0 Manual

6.2.4.2

Connecting transfer switching equipment sizes 1 and 2 to the circuit

Hazardous voltage!
Ensure there is no live voltage before connecting the transfer switching equipment to the
circuit.
NOTICE
System damage if equipment is not installed properly!
Connect the power supply systems with phase equality.
Mount the bridging bars before connecting the transfer switching equipment to the circuit.
For more information, see chapter Connecting a bridging bar to sizes 1 and 2 (Page 39).
3KC0 manual transfer switching equipment
Manual, 09/2018, L1V30368969105-01
WARNING
Connection
6.2 Connecting to the circuit
41