Messages - Panasonic VDR-D160GC Operating Instructions Manual

LSQT1182(GC ENG).book 212 ページ ２００７年１月１８日 木曜日 午後４時４４分
Indications

Messages

CANNOT RECORD.
NO DATA.
INCOMPATIBLE DISC.
PLEASE CHECK THE
DISC.
FOR BEST
PERFORMANCE
PANASONIC DISC IS
RECOMMENDED.
CANNOT RECORD.
(THIS DISC IS FINALIZED)
CANNOT RECORD. DISC
IS FULL.
CANNOT RECORD. THE
NUMBER OF SCENES HAS
EXCEEDED THE MAXIMUM
LIMIT.
INTERNAL TEMPERATURE
TOO HIGH. PLEASE TURN
UNIT OFF AND WAIT A
WHILE.
CANNOT UN-FINALIZE
THIS DISC.
212
LSQT1182
Data writing to the disc or card has failed.
≥ There are no images recorded on the disc or card.
≥ The disc is scratched or dirty. Eject the disc and clean it.
(l 131) If there are scratches on the disc, use a new disc.
You inserted an incompatible disc (copy-protected discs, etc.).
≥ You inserted a disc that cannot be read on this unit (a disc
recorded in NTSC video format etc.).
≥ The disc is scratched or dirty. Eject the disc and clean it.
(l 131) If there are scratches on the disc, use a new disc.
If this message appears when a disc is inserted, the disc may
be unrecordable. It is recommended that you use Panasonic
discs, since their compatibility with this unit has been confirmed.
Refer to the Panasonic web site for information about disc
compatibility etc.
http://panasonic.co.jp/pavc/global/cs/e_cam
(This website is in English only.)
A finalized DVD-RW (Video format) or DVD-R has been
inserted. After finalizing, the discs become play-only and cannot
record. If you un-finalize a DVD-RW (Video format), it can be
used for recording. (l 197)
The disc is full or the number of scenes has reached the
maximum limit so no further data can be recorded. Delete
unnecessary scenes (l 177) or insert a new disc.
The temperature of the unit is high so it cannot be operated.
Turn off the power, wait until the unit cools and then turn on the
power again.
DVD-R cannot be un-finalized.
DVD-RW (VR format) cannot be un-finalized. DVD-RW (VR
format) after finalization can be recorded and edited in the same
way as DVD-RW (VR format) before finalization.