Turning The Unit On/Off - Panasonic VDR-D160GC Operating Instructions Manual

LSQT1182(GC ENG).book 136 ページ ２００７年１月１８日 木曜日 午後４時４４分
Power supply

Turning the unit on/off

≥ When recording, remove the lens cap before turning the unit on.
If the unit is turned on with the lens cap fitted, the automatic white balance adjustment may not
function properly.
How to turn on the power
While pressing the button A, set the
OFF/ON switch to ON.
The status indicator B lights red.
≥ The date and time display flashes. Set this. (l 148)
How to turn off the power
While pressing the button A, set the OFF/ON switch to
OFF.
The status indicator B goes off.
When the power is turned on for the first time after changing the disc or battery, the unit carries
out a recognition procedure to check that there are no problems with the disc.
This takes approximately 25 seconds with DVD-RAM.
If you want to start using the unit as soon as you turn on the power, do the following.
1) Turn on the power.
2) After "READING DISC..." disappears from the screen, turn off the power.
You can start recording approximately 8 seconds after you turn on the power again.
≥ Depending on the condition of the disc, it may take longer than this.
≥ If the date and time are not set, this function does not work.
136
LSQT1182
A
B
A
B