LSQT1182(GC ENG).book 198 ページ 2007年1月18日 木曜日 午後4時44分
Protecting a disc
Protecting a disc
This is for preventing recorded contents from being deleted or edited by mistake.
Further recording and editing is not possible on protected discs until the protection is released.
¬ Rotate the mode dial to select
1 Press the MENU button, then select [
[
DISC PROTECT] and press the joystick.
2 When the confirmation message appears, select [YES], then press the
joystick.
To release disc protection
1) Press the MENU button, then select [
joystick.
2) When the confirmation message appears, select [YES], then press the joystick.
≥ If the disc has been protected on another device, it
may not be possible to release the protection on this
unit. In this case, release the protection on the
device that you used to protect it.
198
LSQT1182
.
SETUP] #
SETUP] # [
DISC PROTECT] and press the
(RAM) (-RW‹VR›)