Panasonic VDR-D160GC Operating Instructions Manual page 206

LSQT1182(GC ENG).book 206 ページ ２００７年１月１８日 木曜日 午後４時４４分
With a printer (PictBridge)
8 Select the layout setting on [
STANDARD: Layout specific to the printer
:
:
≥ You cannot set page layouts not supported on the printer.
9 Select [
The pictures are printed.
≥ Exit PictBridge by disconnecting the USB cable after the pictures have
been printed.
When you stop printing halfway
Move the joystick down.
A confirmation message appears. If [YES] is selected, the number of prints set is cancelled and the
screen returns to step 3. If [NO] is selected, all the settings are kept and the screen returns to
step 3.
≥ Avoid the following operations during printing.
These operations disable proper printing.
– Disconnecting the USB cable
– Removing the SD card
– Switching the mode dial
– Turning off the power
≥ Check the settings for the paper size, quality of
print, etc. on the printer.
206
LSQT1182
No frame print
Frame print
PRINT] # [YES] and press the joystick.
PAGE LAYOUT].
≥ You may not be able to print still pictures recorded
with other products.
≥ When the unit is connected directly to the printer,
the DPOF settings cannot be used.
≥ Connect the printer directly to this unit. Do not use a
USB hub.