Protecting A Disc - Panasonic VDR-D150GC Operating Instructions Manual

LSQT1049(ENG).book 201 ページ ２００５年１２月２０日 火曜日 午後６時４５分

Protecting a disc

This is for preventing recorded contents from being deleted or edited by mistake.
Further recording and editing is not possible on protected discs until the protection is released.
¬ Rotate the mode dial to select
1 Press the MENU button, then select [
[ DISC PROTECT] and press the joystick.
2 When the confirmation message appears, select [YES], then press the
joystick.
To release disc protection
1) Press the MENU button, then select [
joystick.
2) When the confirmation message appears, select [YES], then press the joystick.
≥ If the disc has been protected on another device, it
may not be possible to release the protection on this
unit. In this case, release the protection on the
device that you used to protect it.
.
SETUP] #
SETUP] # [
DISC PROTECT] and press the
Protecting a disc
(RAM) (-RW‹VR›)
201
LSQT1049