End Of Product Life - Graco LineLazer ES 1000 Installation, Repair, Parts

Nominal Battery Pack Voltage
Quantity
Type
Voltage (Nominal)
Dimensions
Capactiy (Nominal, 20hr rate)
Maximum Charging Current
Battery Temperature
Operating
Charging
Storaging

End of Product Life

At the end of the product's useful life, dismantle and
recycle it in a responsible manner.
• Perform the Pressure Relief Procedure.
• Drain and dispose of fluids according to applicable
regulations. Refer to the material manufacturer's
Safety Data Sheet.
3A4603F Operation, Repair, Parts
LineLazer ES 1000 & ES 2000
ES 1000: 1 or 2
Deep Cycle Absorbent Glass Mat (AGM)
12.99" x 6.73" x 8.46"
-4-140°F
14-140°F
-4-140°F
• Remove motors, batteries, circuit boards, LCDs
(liquid crystal displays), and other electronic
components. Recycle according to applicable
regulations.
• Do not dispose of batteries or electronic
components with household or commercial waste.
• Deliver remaining product to a recycling facility.
12 VDC
ES 2000: 2
12 VDC
330 mm x 171 mm x 220 mm
100 Amp-hour
67.5 Amps
-20-60°C
-10-60°C
-20-60°C
End of Product Life
117