Instruction Labels/Packing Checklist - Billy Goat DL2900V Owner's Manual

Instruction Labels
The labels shown below were installed on your BILLY GOAT® DL Vacuum. If any labels are damaged or
missing, replace them before operating this equipment. For your convenience in ordering replacement labels,
part numbers are included in the Illustrated Parts List. The correct position for each label may be determined
by referring to the Figure and Item numbers shown.
Fig. 1
DANGER KEEP HANDS
AND FEET AWAY
P/N 440424
Fig. 4
EXPLOSIVE FUEL
Packing Checklist
Your Billy Goat is shipped from the factory in one carton and is completely assembled except for the
exhaust elbow, nozzle, handle loop for nozzle, hose booms, hose bands, hose coupler, hose clamps
and related hardware.
Part No. 792504
Fig 2.
WARNING SECURE
P/N 790232
Fig. 5
WARNING LINER DL
P/N 100330
Fig. 8
SECURE NOZZLE
P/N 790232
READ all safety instructions before assembling unit.
TAKE CAUTION when removing the unit from the box.
PUT OIL IN ENGINE BEFORE STARTING
Fig. 3
DANGER FLYING DEBRIS
P/N 810736
Fig. 6
WARNING ENGINE OVERHEAT
P/N 811215
4
Fig. 7
DL INSTRUCT/WARN
P/N 790142
Form No. F070617B