Billy Goat KV VACUUM KV600 Owner's Manual
Billy goat vacuum cleaner user manual
Hide thumbs
Also See for KV VACUUM KV600:
- Owner's manual (24 pages) ,
- General safety and warranty (36 pages) ,
- Owner's manual (10 pages)
Table of Contents
Advertisement
Accessories
ON BOARD
FELT
VACUUM
DEBRIS BAG
HOSE KIT
4"(102mm) x 7'
For use in
(2.13m)
leaves and
For vacuuming
grass in dusty
in hard to reach
conditions.
areas.
P/N 891125
P/N 891126
Part No 891013
KV Push Owner's Manual
BILLY GOAT KV VACUUM
Owner's Manual
KV600, KV650H
NOZZLE WEAR
CASTER KIT
GUARD KIT
For use in
To allow for
increasing the
easy rolling and
life of your
maneuverability
nozzle by
on smooth
protecting it from
surfaces.
damage
P/N 891127
P/N 891128
SHREDDER
KIT
Shreds
leaves,
reducing total
volume.
P/N 890209
1
KV LINER KIT
PROTECTIVE
COVER
Increases the
Protects the
life of the
machine from
housing by
the environment
protecting it from
when not in use.
damage.
P/N 891134
P/N 891137
Form No F110408A
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Billy Goat KV VACUUM KV600
Summary of Contents for Billy Goat KV VACUUM KV600
- Page 1 BILLY GOAT KV VACUUM Accessories ON BOARD FELT VACUUM DEBRIS BAG HOSE KIT 4"(102mm) x 7' For use in (2.13m) leaves and For vacuuming grass in dusty in hard to reach conditions. areas. P/N 891125 P/N 891126 Part No 891013 KV Push Owner’s Manual...
-
Page 2: Table Of Contents
ABOUT THIS MANUAL THANK YOU for purchasing a BILLY GOAT manufactured to provide years of reliable and productive service. This manual provides complete operating and maintenance instructions that will help to maintain your machine in top running order. Read this manual carefully before assembling, operating, or servicing your equipment. -
Page 3: Serial Plate Data And Specifications
SERIAL PLATE DATA Record the model number, serial number, date of purchase, and where purchased. Purchase Date: Purchased From: Specifications Engine: HP Engine: Type Engine: Model Engine: Fuel Capacity Engine: Oil Capacity Total Unit Weight: Overall Length Overall Width Overall Height Max. -
Page 4: General Safety
This symbol indicates that this manual and the engine manufacturer’s manual should be read carefully before assembling, operation, or servicing this equipment. This symbol indicates important information that will prevent damage to your BILLY GOAT KV Vacuum. This symbol indicates the engine oil level should be checked before operating this equipment. - Page 5 KV Push Owner’s Manual DO NOT run this equipment indoors or in any poorly ventilated area. Refueling outdoors is recommended. DO NOT refuel this equipment while the engine is running. Allow engine to cool for at least two minutes before refueling. DO NOT store gasoline near an open flame.
-
Page 6: Vibration Data
SOUND Sound tests were conducted in accordance with 2000/14/EEC, and were performed on 7-25-07 under the conditions listed below. Sound power level listed is the highest value for any model covered in this manual. Please refer to serial plate on the unit for the sound power level for your model. -
Page 7: Instruction Labels
INSTRUCTION LABELS The labels shown below were installed on your BILLY GOAT this equipment. Item numbers from the Illustrated Parts List and part numbers are provided for convenience in ordering replacement labels. The correct position for each label may be determined by referring to the Figure and Item numbers shown. -
Page 8: Packing Checklist & Assembly
PACKING CHECKLIST Your Billy Goat KV Vacuum is shipped from the factory in one carton, completely assembled except for the upper handle, debris bag, and bag quick disconnect. READ all safety instructions before assembling unit. TAKE CAUTION when removing the unit from the box the Handle Assembly is attached by... -
Page 9: Operation
OPERATION Like all mechanical tools, reasonable care must be used when operating machine. Inspect machine work area and machine before operating. Make sure that all operators of this equipment are trained in general machine use and safety. PUT OIL IN ENGINE BEFORE STARTING STARTING ENGINE : See engine manufacturer’s instructions for type and amount of oil and gasoline used. -
Page 10: Debris Bag
KV Push Owner’s Manual OPERATION VACUUMING OPERATION VACUUM NOZZLE HEIGHT ADJUSTMENT : is raised and lowered by rotating the knob near the left rear wheel to raise or lower to a height that fits the task. FOR MAXIMUM PICKUP : Adjust nozzle close to debris, but without blocking airflow into the nozzle. NOTE: Never bury nozzle into debris. -
Page 11: Maintenance
COMPOST Vacuumed leaves, grass and other organic material from your own yard can be emptied into a pile or composter to provide enriched soil for later use as fertilizer in gardens and flower beds NOTE: Allow green chips to dry before spreading around living plants. MAINTENANCE ERIODIC AINTENANCE... -
Page 12: Warranty Claim Procedure
Warranty Claim. • The distributor service manager will sign off on the claim and submit it to BILLY GOAT for consideration. • The Technical Service Department at BILLY GOAT will study the claim and may request parts to be returned for examination. -
Page 13: Maintenance Record
KV Push Owner’s Manual MAINTENANCE RECORD Date Service Performed Part No 891013 Form No F110408A... -
Page 14: Illustrated Parts & Parts Lists
KV Push Owner’s Manual PARTS DRAWING KV Part No 891013 Form No F110408A... -
Page 15: Parts List
PARTS LIST ITEM * Denotes standard hardware MAIN FRAME HOUSING NEW KD item that NOZZLE ASSEMBLY TKV may be purchased AXLE WA KV MICRO locally. PLATE TOP ENGINE KV IMPELLER 12.75 WA PUSH VAC DOOR EXHAUST ASSY RAW WASHER 1/2" SAE Z/P WHEEL ASSY 12"... - Page 16 KV Push Owner’s Manual BRUSH CUTTER FORCE BLOWER AERATOR If you liked this product please feel free to view our full line of quality lawn care, renovation, and debris removal products at www.billygoat.com DL VACUUM MULTI VACUUM POWER RAKE Part No 891013 Form No F110408A...
Need help?
Do you have a question about the KV VACUUM KV600 and is the answer not in the manual?
Questions and answers