Table of Contents
Advertisement
Control system devices installation
REMOTE THERMOSTAT AND REMOTE CONTROL ( WIRED OR WIRELESS )
They should be located in the main room of the zone they manage
taking into account the following criteria :
-
the place of installation should be chosen so that the sensor
can measure the room temperature as accurately as possi-
ble without being influenced by the direct solar radiation or by
other hot or cold sources (about 1,5 meters above the floor);
-
in the case of wall mounting, enough clearance above the de-
vice must remain, enabling it to be fitted and removed.
The power supply of the remote thermostat and of the remote control is supplied by the mounting base. When the devices are re-
moved from their base, power is cut off and the devices are out of operation. The wireless remote control is powered by three 1,5 V
alkaline batteries type AA (LR06).
Remote thermostat
Remote control
34
CONTROL SYSTEM
1
CL+
2
CL-
Wired
Wireless
1
CL+
BSB data
2
CL-
BSB ground
3
G+
Power supply
min.
m
BSB data
BSB ground
Advertisement
Table of Contents
