Advertisement
On the Disk Format page, ensure that the default disk format of Thick Provision Lazy
Zeroed is selected and then click
i
Tech Tip
Because VM performance may degrade during the resizing of a partition, Thin Provision is not
recommended.
If Network Mapping is listed, configure it and select the network mapping that applies to
your infrastructure (the default is VM Network), and then click
On the Ready to Complete page, confirm your deployment Setting, select
Configure the VM guest
Right-click the VM guest and click
boot.
Configure a static IP address following the format shown in the console and press
static 10.106.170.169 255.255.255.128 10.106.170.129
Use your browser to navigate to the IP address or host name of the device.
and click
.
.
. The VM guest will take some time to
Deployment Details
.
.
PAGE 17
Advertisement
