Cisco BE6000 Design Manual page 46

Create a user for Unified CM access
1.
Create a user for TMS CMR access
2.
Create a user for TMS-scheduled conference access
3.
Change the system settings
4.
Add IP addresses for instant, personal and scheduled CMR conference locations on
5.
Conductor
Create Service preferences
6.
Set up conference bridge pools
7.
Add Conference Bridge Pool in Service preference
8.
Create a conference template for an instant CMR conference
9.
Create a conference template for personal CMR conferences
10.
Create a conference template for scheduled CMR conference
11.
Create a conference alias for an personal CMR conferences
12.
Create a conference alias for an scheduled CMR conference
13.
Create locations in Conductor
14.
Add locations to conference bridge pools
15.
Create a user for Unified CM access
For Unified CM to communicate with TelePresence Conductor, you must configure a user with
administrator rights on TelePresence Conductor. We recommend that you create a dedicated Read-write
user for this task.
Log into TelePresence Conductor as a user with administrator rights.
Go to
Click
Enter the following in the relevant fields:
Name—

Access level—

Password—

accounts.
.
Deployment Details
PAGE 46