Cisco BE6000 Design Manual page 51

Ensure that under the Status section, the State is
couple of minutes.
Add IP addresses for instant, personal and scheduled CMR conference locations
on Conductor
In
.
Add the IP addresses used for instant CMRs (
i
Tech Tip
These IP addresses must be on the same subnet as the primary TelePresence Conductor IP interface,
and they must be reserved for use by this TelePresence Conductor alone.
Add the IP addresses used for personal and scheduled CMR conferences
(
, in the Additional addresses for LAN 1 section click
) and click .
Deployment Details
. Synchronization can take a
) and click
PAGE 51
.