Miele ProLine CS 1221-1 Operating And Installation Instructions page 49

Granite and marble worktops
You will need heavy-duty double-
sided tape (not supplied) to secure the
spring clamps and spacer bars.
 Attach the adhesive tape  along the
top edge of the cut-out in the
positions shown in the illustrations.
 Position the spring clamps  and
spacer bars  on the top edge of the
cut-out and press them firmly into
place.
 Apply silicone adhesive to the side
edges and bottom edge of the spring
clamps  and spacer bars .
 Then fill the gap  between the
spacer bars  and the worktop with
silicone.
Installation
49