Cleaning And Care - Miele ProLine CS 1221-1 Operating And Installation Instructions

Cleaning and care


Risk of burning on hot cooking
zones!
The cooking zones will be hot after
use.
Switch the cooktop off.
Allow the cooking zones to cool
down before cleaning the cooktop.

Risk of damage due to moisture
ingress.
The steam from a steam cleaner
could reach electrical components
and cause a short circuit.
Do not use a steam cleaner to clean
the cooktop.
The use of unsuitable cleaning
agents can cause the surfaces to
discolour or alter. All surfaces are
susceptible to scratching.
Remove any residual cleaning agent
immediately.
Never use abrasive sponges or
cleaning agents.
34
Allow the ProLine element to cool
down before cleaning.
 Clean the ProLine element and
accessories after each use.
 Dry the ProLine element thoroughly
after every cleaning to avoid
limescale residue.
Unsuitable cleaning agents
To avoid damaging the surfaces of the
appliance, do not use:
– washing-up liquid,
– cleaning agents containing soda,
alkalines, ammonia, acids or
chlorides,
– cleaning agents containing descaling
agents,
– stain and rust removers,
– abrasive cleaning agents, e.g.
powder cleaners and cream cleaners,
– solvent-based cleaning agents,
– dishwasher cleaner,
– grill and oven cleaners,
– glass cleaning agents,
– hard, abrasive brushes or sponges
(e.g. pot scourers), or sponges which
have been previously used and still
contain abrasive cleaning agents,
– dirt erasers.