Installation
Preparing the worktop
Make the worktop cut-out as shown
in "Building-in dimensions" or as
calculated (see "Installing several
ProLine elements"). Remember to
maintain the minimum safety
distances (see "Safety distances").
Wooden worktops
Seal the cut surfaces of wooden
worktops with a suitable heat-
resistant sealant to avoid swelling
caused by moisture. The sealant
must be heat-resistant.
Make sure the sealant does not
come into contact with the top
surface of the worktop.
48
Position the spring clamps and
spacer bars at the top edge of the
cut-out in the positions shown in the
illustrations.
Secure the spring clamps and
spacer bars with the 3.5 x 25 mm
wood screws supplied.