Wheel Removal - Honda ACTIVA 4G 2017 Owner's Manual

WHEEL REMOVAL

Refer to the Safety Precautions on Page 36.
Front Wheel Removal
1. Place the vehicle on its center stand.
2. Raise the front wheel off the ground by
pressing from rear side.
3. Remove the pivot arm cover (1) from
both side by removing the screw (2).
4. Remove the speedometer cable (3) by
pushing the tab (4).
5. Disconnect and remove the brake arm
joint spring (5).
6. Remove the brake adjusting nut (6)
and remove the brake cable (7), brake
arm joint (8) from the front brake arm
(9).
7. Remove the front axle nut (10).
8. Remove the front axle shaft (11), collar
(12) and the wheel.
Brake arm joint spring must be removed
from brake arm joints before removing
brake cable and brake arm.
Honda Motorcycle & Scooter India Pvt. Ltd.
(5)
(11)
(9)
(6)
(8)
(1) Pivot arm cover ¼ihoV vkeZ doj½
(2) Screw ¼LØq ½
(3) Speedometer cable
(4) Tab ¼VS c ½
(5) Brake arm joint spring
(6) Brake adjusting nut
(7) Brake cable ¼cz s d ds c y½
(8) Brake arm joint
¼cs z d vkeZ Tokba V ½
(9) Front Brake arm ¼Ýa V cs z d vkeZ ½
(10) Front axle nut
¼Ýa V ,Dly uV½
(11)Front axle shaft ¼Ýa V ,Dly "kk¶V½
(12)Collar ¼dkW y j½
(10)
(4)
(3)
(12)
(1)
(7)
(2)
¼LihMks e hVj ds c y½
¼cs z d vkeZ Tokba V Liz h a x ½
¼cz s d ,MtfLVxa uV½
ACTIVA 4G
49