Instruction Manual
D104239X012
Valve Control
Valve Control allows all functions of the system to be
tested prior to commissioning with the DCS. It
provides for a Dashboard for Controlling the MPA and
providing Host ESD. It also includes a tab for Alarm
Status.
Valve Control can be used to command the actuator to
go to the next port or go to a desired port number. "Go
to Port" is the new setpoint in the range of 0 to 8 for
the 8 ports (including the Home Port).
Based on selections for general display preferences in
DCMLink™ Setup, the Dashboard can display Digital
indication of Setpoint, Port Position, and Torque.
Figure 24.
Figure 25.
Figure 26.
Figure 27.
Multiport Flow Selector
January 2019
39