R82 Multi Frame:x Pre-Sales Information

Pre-sales information
Multi Frame:x
User information appropriate for
use by people with visual, reading
or cognitive disability
Information available in pictogram
Intended use and intended
environment including standard
options
Maintenance instructions
Cleaning description
2017-03 rev. 03
The latest version of all instructions are always available on the R82
website support.R82.org and can be printed in larger sizes
The instructions are made as pictograms
The Multi Frame:x is a wheelchair base for customized seating systems.
Both users and care-givers benefit from the many built-in functions and
simple adjustment possibilities. The Multi Frame:x is suitable for users
needing an individual seating system and base, e.g. children with CP,
GMFCS level 3-5.
Different settings for the height and rear wheels ensure proper
positioning and center of gravity.
The Multi Frame:x comes in one size and is ideal for both indoor and
out-door use.
If mounted with seat and labeled transport fittings the Multi Frame:x can
be used for forward facing transport in motor vehicles with approved 4
point strap-type tiedown system and approved 3 point belt. For
transportation the Multi Frame:x is suitable in the load range of 43 kg to
specified max load for transportation.
Maintenance of a medical device is wholly the responsibility of the owner
of that device. Failure to maintain a device in accordance with the
instructions may invalidate the device's warranty. Furthermore, failure to
maintain a device may compromise the clinical condition or safety of
users and/or their caregivers.
Frequency Description
Daily - Use a dry cloth to clean the product
- Visual inspection. Repair or replace any damaged
or worn-out parts
- Ensure that all fasteners are in place and fitted
correctly
- Check all fittings and buckles for signs of worn out
parts
- Be aware of any max mark indications before
adjustment
Weekly - Check that all castors are moving freely and that all
wheel locks/brakes are easily activated
- Wipe off any residue and dirt from the product
using a cloth with warm water and a mild
detergent/soap and dry before use
Monthly - All nuts and bolt on this product must be checked and
tightened to avoid unnecessary failures
- Oil the swing-away parts. We recommend you use
a professional lubricant system
- The product has to be checked and tightened by a
qualified technician at least every 12 months to
avoid failures.
Annually
- Inspect the frame for cracks or signs for worn-out
parts and carry out annual service. Never use a
product which appears to be substandard or faulty
This product can be washed for 15-20 minutes at 60°C, using a mild
R82 A/S Parallelvej 3 DK - 8571 Gedved
support.R82.org
Page 1 of 3