INTERFACE FEATURES
• Provides accessory power (12-volt 10-amp)
• Retains R.A.P. (retained accessory power)
• Provides NAV outputs (parking brake, reverse, speed sense)
• Retains audio controls on the steering wheel
• Retains SYNC
(4.2-inch display screen models only)
®
• Retains the factory backup camera
• Can be used in both amplified and non-amplified models (including Sony*)
• Retains balance and fade (excluding Sony)
• Micro "B" USB updatable
* Only for 2013-2016 models
INTERFACE COMPONENTS
• Axxess interface (built into the touchscreen display)
• 5841 harness
• HVAC interface
• HVAC interface harness
• 4-pin flat to 4-pin stacked harness
• 16-pin harness with stripped leads
• 54-pin backup camera harness
• 12-pin backup camera harness
• 4-pin harness with yellow RCA jacks
• Male DIN connector with a 6-pin harness
• Female 3.5mm connector with stripped leads
AXXESS INTERFACE INSTALLATION
TABLE OF CONTENTS
Backup camera harness ............................................................................................................ 8
Installation .................................................................................................................................... 9
Programming ...............................................................................................................................10
Final assembly .............................................................................................................................10
Extra features ...............................................................................................................................10
Troubleshooting ...........................................................................................................................14
TOOLS REQUIRED
• Crimping tool and connectors, or solder gun, solder, and heat shrink
• Tape • Wire cutter • Zip ties
5
REV. 8/23/2018 INST99-5841B