Warning Lamps And Indicators - Ford Escape 2014 Owner's Manual

Trip Computer
See Trip Computer (page 72).
Vehicle Settings and Personalization
See General Information (page 66).
Engine Coolant Temperature
Gauge
WARNING
Never remove the coolant reservoir
cap when the engine is running or
hot.
At normal operating temperature, the
needle remains in the center section.
Note: Do not restart the engine until the
cause of overheating has been resolved.
If the needle enters the red section, the
engine is overheating. Stop the engine,
switch the ignition off and determine the
cause once the engine has cooled down.
See Engine Coolant Check (page 192).
Fuel Gauge
Switch the ignition on. The fuel gauge will
indicate approximately how much fuel is
left in the fuel tank. The fuel gauge may
vary slightly when your vehicle is moving
or on a gradient. The arrow adjacent to the
fuel pump symbol indicates on which side
of the vehicle the fuel filler door is located.
A low fuel reminder will be triggered when
the fuel gauge needle is at 1/16th or
vehicles equipped with a DTE (Drive To
Empty) is at 60 km, whichever occurs first.
Escape/Kuga (CBS) Australia, Vehicles Built From: 08-09-2014, TF 19A321 AD enAUS
Instrument Cluster
WARNING LAMPS AND
INDICATORS
The following warning lamps and
indicators will alert you to a vehicle
condition that may become serious. Some
lamps will illuminate when you start your
vehicle to make sure they work. If any
lamps remain on after starting your vehicle,
refer to the respective system warning
lamp for further information.
Note: Some warning indicators appear in
the information display and function the
same as a warning lamp but do not display
when you start your vehicle.
Anti-Lock Braking System Warning
Lamp
to have the normal braking system
(without anti-lock braking system) unless
the brake system warning lamp is also
illuminated. Have your vehicle checked by
an authorized dealer.
Automatic High Beam Lamp
Equipped)
Battery Warning Lamp
equipment. Have your vehicle checked by
an authorized dealer immediately.
61
If it illuminates when you are
driving, this indicates a
malfunction. You will continue
It will illuminate when this
feature is on. See Automatic
High Beam Control (page 47).
If it illuminates when driving, this
indicates a malfunction. Switch
off all unnecessary electrical
(If