Ford Escape 2014 Owner's Manual page 301

Adjusting the Navigation Voice Level
You can adjust the voice prompt level
during an active voice prompt by using the
volume control.
Note: During active route guidance pressing
the information button will repeat the last
navigation instruction.
Message
Tolerant
Then begin to input your destination. Press
the OK button. The system will search for
destinations with similar spellings. Use the
arrow buttons to select a destination from
the list and press the OK button to confirm
your destination.
Route Displays
Map Display
Press the MAP button to view map mode.
This view will show your current location
with your vehicle in the center shown as
an arrow surrounded by a circle. The arrow
will face in the direction of travel.
The information on the top line gives the
name of the current road, or the next road
to take if a turn is approaching.
You can change the way the map is
displayed by altering the zoom and
orientation settings. Press function button
one. The current map scale is shown on
the display.
Escape/Kuga (CBS) Australia, Vehicles Built From: 08-09-2014, TF 19A321 AD enAUS
Navigation
Nav Audio Mixing
This feature allows you to adjust the
volume mix between the audio unit and
navigation voice level.
Tolerant Destination Input
This function will search a number of
destinations with a similar spelling to what
you have entered. This is helpful if you are
unsure on how to spell a destination.
Press the NAV button and scroll to this destination input
option before entering your destination details.
Map scale settings may be set between
0.05 miles to 500 miles or 50 meters to
500 kilometers, with an auto setting on
the top. The auto setting continuously
changes the map scale according to
vehicle speed and the road type being
driven.
You can use the arrow buttons to change
the view to 2D, turn-by-turn, 3D or a clean
view.
Zoom
This feature will automatically increase
the zoom on the map display at times
when you are required to make a turn, or
perform more complex maneuvers. Shortly
after the zoom scale will return to the
previous level when in auto mode.
Manual: Press function button one and
adjust the setting using the left or right
arrow buttons. Press OK to confirm your
setting.
Auto: Press function button one and using
the up or down arrow key select the auto
option. Press OK to confirm your setting.
298
Action