Ford Escape 2014 Owner's Manual page 243

Sound
Bass
Midrange
Treble
Set Balance and Fade
DSP Occupancy
EQ Mode
Adaptive Volume
*
Your vehicle may not have these sound
settings.
Vehicle
Press the Settings icon >
Vehicle, then select from the
E142607
following:
• Ambient Lighting (If Equipped)
• Camera Settings
• Enable Valet Mode
Ambient Lighting (If Equipped)
When you turn this feature on, ambient
lighting illuminates various places, such as
the footwells, with a choice of colors. To
access and make adjustments:
E142607
1. Press the Settings icon > Vehicle >
Ambient Lighting.
2. Touch the desired color.
3. Use the scroll bar to increase or
decrease the intensity.
To turn the feature on or off, press the
power button.
Escape/Kuga (CBS) Australia, Vehicles Built From: 08-09-2014, TF 19A321 AD enAUS
SYNC
*
*
240
2
Camera Settings
This menu allows you to access settings
for your camera.
Press the Settings icon >
Vehicle > Camera Settings,
E142607
then select from the following
settings:
• Enhanced Park Aids (If Equipped)
• Rear Camera Delay.
You can find more information on the rear
view camera in your vehicle Owner
Manual.
Enable Valet Mode
Valet mode allows you to lock the system.
No information is accessible until the
system is unlocked with the correct PIN.
You can create your own four-digit PIN to
lock and unlock the system.
E142607
1. Press the Settings icon > Vehicle >
Enable Valet Mode.
2. Enter a four-digit PIN twice, as
prompted.
After you press Continue, the system locks
until you enter the PIN again.
Note: If the system locks, and you need to
reset the PIN, enter 3681 and the system
unlocks.
Settings
Access and adjust system settings, voice
features, as well as phone, navigation and
wireless settings.
System
Press the Settings icon >
Settings > System, then select
E142607
from the following: