Ford Escape 2014 Owner's Manual page 217

E93020
Refer to vehicle jack manufacturer's
instructions.
Assembling the Wheel Brace
Type One
WARNING
The screw-in towing eye has a
left-hand thread. Turn it
counterclockwise to install it. Make
sure that the towing eye is fully tightened.
E122502
Insert the screw-in towing eye into the
wheel brace.
Escape/Kuga (CBS) Australia, Vehicles Built From: 08-09-2014, TF 19A321 AD enAUS
Wheels and Tires
Type Two
E159432
Note: When jacking your vehicle, you will
need to rotate the wheel brace 180 degrees,
pivot the wheel brace back to the original
position before rotating again.
Using the Wheel Brace as a Jack Handle
1.
2. Rotate the wheel brace 180 degrees.
3. Return the wheel brace to the original
Removing the Wheel Trim
Type One
E122314
1.
214
Attach the wheel brace to the jack
horizontally.
position and repeat as necessary.
1
Insert the wheel trim remover.
2