ADJ FOCUS SPOT 4Z User Instructions page 23

Focus Spot 4Z
FLIP DISPLAY
- With this function you can rotate (flip) the display 180 degrees.
1. Press the MODE button to access the main menu. Press the UP or DOWN buttons so that "Function" is
highlighted, then press ENTER.
2. Press the UP or DOWN buttons until "LCD.Set" is displayed, press ENTER.
3. Press UP or DOWN buttons, until "Flip Display" is displayed, and press ENTER.
4. Either "Off" or "On" will be displayed. Use the LEFT or RIGHT buttons find your setting.
5. Press the ENTER button to confirm your selection or press the MODE button to exit.
KEY LOCK
- With this function activated the buttons will lock autommatically after 15 seconds.
1. Press the MODE button to access the main menu. Press the UP or DOWN buttons so that "Function" is
highlighted, then press ENTER.
2. Press the UP or DOWN buttons until "LCD.Set" is highlighted, then press ENTER.
3. Press UP or DOWN buttons, until "Key Lock" is highlighted, then press ENTER.
4. Use the LEFT and RIGHT buttons to scroll through the key lock options, and press ENTER to
make your selection.
• "OFF" - The keypad is unlocked, simply press the MODE button to activate the keypad.
• "ON" - This is a simple keypad lock. Press the MODE button for at least 5 seconds to unlock the
keypad.
• "ON1. This setting is used to prevent the accidental unlocking of the keypad. To unlock the keypad
you will have to enter a passcode. To unlock the keypad press UP, DOWN, UP, DOWN, & ENTER
in that order.
5. Press the ENTER button to confirm your selection or press the MODE button to exit.
DISPLAY FLASH
- With this function active, the display will flash when the DMX signal is lost.
1. Press the MODE button to access the main menu. Press the UP or DOWN buttons so that "Function" is
highlighted, then press ENTER.
2. Press the UP or DOWN buttons until "LCD.Set" is highlighted, then press ENTER.
3. Press UP or DOWN buttons, until "DispFlash" is highlighted, then press ENTER.
4. Either "Off" or "On" will be displayed. Use the LEFT or RIGHT buttons find your setting.
5. Press the ENTER button to confirm your selection or press the MODE button to exit.
CHANNEL VALUE
- This function will allow you to see the DMX value of each DMX channel that is currently
being used at the time.
1. Press the MODE button to access the main menu. Press the UP or DOWN buttons so that "Function" is
highlighted, then press ENTER.
2. Press the UP or DOWN buttons until "Disp.Set" is highlighted, then press ENTER.
3. Press the UP or DOWN buttons until "Chan. Value" is highlighted, then press ENTER.
4. A DMX Channel will now be displayed. Example: Pan, Rotation, LED's etc... Press ENTER when you find
the DMX channel that you would like to check. When you press ENTER the DMX value of that channel will
displayed.
5. Press the MODE button to exit.
ADJ Products, LLC - www.adj.com - Focus Spot 4Z User Manual Page 22
Operating Instructions