Table of Contents
Advertisement
Order Number:
Description:
Devices:
Marking:
Note:
Many DTE devices have special requirements. See section, Guidelline for Custom Cables.
Page 3-6
Standard Cable for Terminals and Other DTE Devices
Figure 3-3:
SpecificationsTerminal & DTE Devices Cable
Table 3-5:
A 6-foot (1.8 meter) shielded cable with a 10-pin RJ-45 connector
at one end, and a Male DB-25 connector at the other end.
Most terminals, printers, and other DTE devices.
The cable is marked 2-20121 for identification purposes.
RAS 2000 PowerRack Hardware Guide
Cable Pin-out for Terminals & DTE Devices
VP-RJ-DB/T CABLE
Advertisement
Table of Contents
Need help?
Do you have a question about the IntelliServer RAS 2000 PowerRack and is the answer not in the manual?
Questions and answers