Table of Contents
Advertisement
Unpacking and Inspection
Page 2-2
The RAS 2000 PowerRack is shipped with the following items:
•
RAS 2000 PowerRack
•
RAS 2000 Hardware Installation Guide (this book)
•
RAS 2000 Configuration Guide
•
RAS 2000 Read Me First card
•
Warranty Registration card
•
Power cord
•
Cable - VP-RJ-DB/M (Cable ID 2-20121)
•
Mounting accessory kit, which contains:
•
(2) Rack mounting brackets
•
(1) Sheet of labels
•
(4) Black pan head Phillips screws (#6-32
•
(4) Truss head screws (#4-40
•
(4) Pan head Phillips screws (#M6x8)
•
(4) Pan head Phillips screws (#10-32x
•
(4) Black rubber feet
Please make sure you have everything on the above list. If you don't, call your
Sales representative at Computone at 770-625-0000.
For rack installation, the black #6-32 pan head Phillips screws are used to fasten
the rack mounting brackets to the PowerRack. Supplied also are the M6x8 screws
for mounting the PowerRack into your rack enclosure. Some enclosures use one
size and some use the other. For desk-top installation, the #4-40 screws are used
to secure the rubber feet to the bottom of the RAS 2000 PowerRack.
RAS 2000 PowerRack Hardware Guide
1
/
")
4
5
/
")
16
1
/
)
2
Advertisement
Table of Contents
Need help?
Do you have a question about the IntelliServer RAS 2000 PowerRack and is the answer not in the manual?
Questions and answers