Table of Contents
Advertisement
CHAPTER 2
Important Notices
DANGER: Electrical Shock Hazard. Grounding circuit continuity is vital for safe operation of
Hardware & Installation
Overview
This chapter gives an overview of the RAS 2000 PowerRack hardware and its
installation, including the following:
•
Unpacking and inspection
•
Hardware overview
•
Line voltage selection
•
Installing mounting hardware
•
Adding serial ports
•
Connecting
The following are important points:
•
Read all installation instructions before connecting power
•
Do not install in areas where the ambient temperature exceeds recommended
limits. The RAS 2000 PowerRack is designed for ambient temperatures in the
o
o
range of 10
to 35
•
When installing the RAS 2000 PowerRack in a rack enclosure, make sure you
do not create a hazardous situation due to uneven mechanical loading. The
PowerRack is not designed to support the weight of other equipment.
•
The RAS 2000 PowerRack's power cord contains a ground pin. Always plug
the power cord into a power receptacle which has a reliable earth ground. Do
not use extensions, power strips, and so on, unless they are also grounded.
the RAS 2000 PowerRack. Never operate the RAS 2000 with grounding connec-
tor disconnected.
RAS 2000 PowerRack Hardware Guide
o
o
Celsius (50
to 95
F).
Page 2-1
Advertisement
Table of Contents
Need help?
Do you have a question about the IntelliServer RAS 2000 PowerRack and is the answer not in the manual?
Questions and answers