Connect To The Console Port - SMC Networks WAP3110-L Quick Start Manual

6. Connect to the
To make initial configuration changes to the AP, connect a PC to the AP's console
port using the included console cable.
Console Port
From a PC running VT-100 terminal emulator software, use the following settings:
◆
◆
◆
◆
◆
◆
Log in to the command-line interface (CLI) using default settings:
◆
◆
For information on manually configuring an IP address for the AP, refer to the
Installation Guide, which is on the Documentation CD included with the AP.
For further information on AP configuration and CLI commands, refer to the
Management Guide, which is on the Documentation CD included with the AP.
1
1
Console Port
Baud rate — 115,200 bps
Character Size — 8 Characters
Parity — None
Stop bit — One
Data bits — 8
Flow control — none
Login Name — admin
Password — null (there is no default password)
– 5 –
Quick Start Guide