Crestron CP4-R Product Manual page 76

Select Heat to have the scene turn heating mode on.
o
Select Auto to have the scene control the temperature automatically via a
o
chosen set point
Select Keep Current Mode to have the scene keep the current thermostat
o
mode.
Adjust Setpoint(s): If this checkbox is selected, the scene adjusts the set points
•
for Heat
Select the temperature set point for each mode from the appropriate spinner
menu.
Tap Save at the bottom of the screen to save changes or tap Cancel to discard changes.
Tap the trashcan button
Tap the back arrow button
70 • Crestron Pyng OS 2 for CP4-R
, Cool , and Auto
to delete the climate scene.
to return to the Setup Scenes screen.
modes to the chosen temperature values.
Product Manual – DOC. 8432A