Crestron CP4-R Product Manual page 63

Add/Remove Loads Dialog Box
To add or remove a lighting load from the scene:
1. Select a room from the Select Room Below menu.
2. Tap the check box next to a lighting load to add or remove it from the scene. A
filled check box indicates that load has been added to the scene.
3. Tap Save to save any changes or Cancel to discard the changes.
Any new lighting loads added to the scene may be adjusted in the Lighting Loads section
of the scene configuration dialog box.
Once all changes have been made, tap Save to save any changes to the lighting scene or
tap Cancel to discard the changes.
Product Manual – DOC. 8432A Crestron Pyng OS 2 for CP4-R • 57