Handset Controls - Bell Excursion 39280 Owner's Manual

DESCRIPTIONS

Handset Controls:

Handset Antenna - A fixed antenna.
IN USE/BATT LOW LED Indicator- -
(IN USE) Flashes rapidly while auto-
scanning. Lights solid whenever the
handset is in TALK mode. Turns off
when the handset is not in use and out of
the base unit.(BATT LOW) This LED
flashes slowly if the handset battery
needs charging.
TALK Button - Press this button to
place a call, answer a call, or end a call.
RE/PA (REDIAL /PAUSE) Button -
(REDIAL)Press to automatically dial the
last phone number dialed up to 32 digits.
(PAUSE) Allows you to insert a 4-
seconds delay between dialed numbers
in PABX systems or long distance
services.
FLASH Buttons – Momentarily hangs
up the phone to access custom calling
features such as Call waiting or Three-
way calling provided by your local
phone company.
Headset Jack – A jack located on the
side of the handset used for connecting
your headset used for connecting your
headset to enjoy a hands-free
communication.
RINGER ON/OFF Switch - For normal
use, set switch to ON. To save battery
power and to turn off the handset ringer,
switch to OFF.
Mute Button---Used to turn off the
handset's microphone so the other party
can not hear your side of the
conversation. Press the MUTE button
again to return to the conversation.
7
OWNER' S MANUAL # 39280 ver. 061703A-1
Page: 7 ENGLISH VERSION
Memory(MEMO) Button – Used for
storing/retrieving phone numbers
to/from the 10 memory locations.
Charge Contacts – For charging the
handset battery pack. We recommend
that you clean these contacts periodically
with alcohol-moistened cloth or cotton
swab.
TONE(*) Button – Press to temporarily
change the dialing mode form pulse to
Tone when dialing in the Pulse mode.
Provides tone function to access special
services such as phone banking.
.
Scan Button – Used to manually select
one of the 40 operating channels when
you experience interference on the
handset.
Volume Control Button - Allow you
to Select the receiver volume level (Low,
Mid, Hi).
BASE UNIT CONTROLS:
Base Antenna - A fixed antenna.
Base Unit Charge Terminals - Used for
charging handset batteries. We
recommend that you clean these contacts
periodically with an alcohol-moistened
cloth or cotton swab.
IN USE/CHARGE LED Indicator -
Lights up to indicate the unit is ON or
when the handset is placed on the base
unit for charging. It flashes to indicate
the page function is in use.
Visual Ringer Indicator - Flashes to
indicate the phone is ringing, as a signal
to the user, when the ringer is off.
PAGE Button - Allows you to locate the
handset when it is not on the base, or to
alert the person near the handset.
061703A-2