Bell Excursion 39280 Owner's Manual page 17

•
No link between
the base and
handset
•
The unit locks up
and becomes
inoperable
•
AC ADAPTOR:USE ONLY WITH CLASS 2 POWER SOURCE, OUTPUT
9VDC, 200mA .
THIS SYMBOL IS INTENDED TO ALERT THE USER OF THE
PRESENCE OF IMPORTANT OPERATING AND
MAINTENANCE (SERVICING) INSTRUCTIONS IN THE
OWNER'S MANUAL.
061703A-2
OWNER' S MANUAL # 39280 ver. 061703A-1
Page: 16
You may have taken the handset at a distance away from the
base that is beyond its normal operating range. Refer to the
section of "Operating Range" in the manual for more details.
In the unlikely event that the unit locks up and becomes
inoperable, you can reset the system by momentarily
disconnecting and reconnecting the handset battery pack.
Afterwards, return the handset to its cradle on the base unit to
reset the security code before using the unit.
Should a power outage occur while the handset is away from
the base unit, the handset must be returned to its cradle on the
base unit to reset the security code when power is resumed.
ENGLISH VERSION
16