Setting The Heat Setting - Electrolux 98030KF-SN User Manual

46
Operating the appliance

Setting the heat setting

To set the heat
setting
Switch off
Locking/unlocking the control panel
The control panel, with the exception of the "On/Off" sensor field, can be locked at any time
in order to prevent the settings being changed e.g. by wiping over the panel with a cloth.
To switch on
To switch off
When you switch the appliance off, the locking function is automatically switched off.
Turning the STOP+GO function on and off
The STOP+GO function simultaneously toggles all active cooking zones to keep-warm mode
then back to the heat setting they were at before
To switch on
To switch off
STOP+GO does not stop timer functions.
STOP+GO controls the entire control panel apart from the sensor field
Using the automatic warm-up function
All cooking zones are equipped with an automatic warm-up function. When setting a heat
setting using the automatic warm-up function, the cooking zone switches to full power
for a certain amount of time and then automatically switches back to the heat setting set.
Step
1.
Touch
2. Move your finger down
from
desired heat setting be-
tween
The length of time that the automatic warm up function operates depends on the heat
setting selected.
Touch the desired heat setting, if necessary, correct
to the left or the right
Touch
Control panel
Touch
Touch
Control panel
Touch
Touch
Control panel
to select the appliance works at full power. After the automatic warm up is
completed, the heat setting
and
Control panel
(for 4 seconds)
previously set heat setting
Previous heat setting (not automatic warm-up or power
function)
/ after 5 seconds
Display
/
Display
Display
.
Display
. As long as is displayed, the
/ is displayed again.
to