Electrolux 98030KF-SN User Manual page 49

Using the timer
Function
Automatic cut-out
Countdown timer
If just one countdown value is set you can change it only when the appliance is switched
on.
If a heat setting is set on this cooking zone in addition to a countdown timer, the cooking
zone is switched off after the time set has elapsed.
If a cooking zone is switched off, the timer function set is also switched off.
Selecting a cooking zone
Step Control panel
1.
Touch
2.
Touch
3.
Touch
4.
Touch
If other timer functions are set, after a few seconds the shortest remaining time of all the
timer functions is displayed and the corresponding pilot light flashes.
Setting the time
Step
1.
2.
Touch or
After a few seconds the pilot light flashes more slowly.
The time is set.
The time counts down.
Switching off the timer function
Step
1.
a heat setting is set
cooking zones not in use
Pilot light of the first cooking zone flashes
once
Pilot light of the second cooking zone flashes
once
Pilot light of the third cooking zone flashes
once
Pilot light of the fourth cooking zone flashes
once
Control panel
Select a cooking zone
/
Control panel
Select a cooking zone
Operating the appliance
Condition
Display
Pilot light for the cooking zone selected
flashes
00 99
to
Pilot light of cooking zone selected flashes faster
Time remaining is displayed
Outcome after the time has
elapsed
acoustic signal
00
flashes
Cooking zone switches off
acoustic signal
00
flashes
Display
minutes
Display
49