Electrical Installation; Mains Power Supply - ESAB Origo Mig C420 PRO Instruction Manual

4 INSTALLATION
WARNING!
During transport, the rear wheels of the power source are in their forward
position. Before use, place the wheels in their rear position.
4.3

Electrical installation

4.4

Mains power supply

Check that the unit is connected to the correct mains power supply voltage, and that it is
protected by the correct fuse size. A protective earth connection must be made, in
accordance with regulations.
Recommended fuse sizes and minimum cable areas
Mig C420 PRO
Voltage V
Current A
at 100% duty cycle
at 60% duty cycle
at 50% duty cycle
2
Cable area mm
Fuse, slow A
0463 272 001
Rating plate with supply connection data
3~ 50 Hz
400 - 415
19
27
30
4 x 4
25
- 11 - © ESAB AB 2017