Roaming; Understanding Roaming; Setting Your Phone's Roam Mode - Sanyo SCP2700 Operating Manual

Hide thumbs Also See for SCP2700:

Table of Contents

Roaming

Recognizing Icons on the Display Screen

Your phone's display screen always lets you know when you are off the Nationwide PCS

Network. Any time you are roaming, the phone displays the roaming icon.

Tip: Remember, when you are using your phone off the Nationwide PCS Network, always dial

numbers using 11 digits (1 + area code + number).

Note: You will pay a higher per-minute rate for roaming calls unless your service plan includes

roaming.

Roaming on Other Digital Networks

When you are roaming on other digital networks, your call quality and security will be similar to

the quality you receive when making calls while on the Nationwide PCS Network. You may not

be able to access certain features depending on the available network.

Note: If you are on a call when you leave the Nationwide PCS Network and enter an area where

roaming is available, your call is dropped. If your call is dropped in an area where you think PCS

Service is available, turn your phone off and on again to reconnect to the Nationwide PCS

Network.

Your phone allows you to control your roaming capabilities. By using the Roaming menu option,

you can determine which signals your phone accepts.

Set Mode

Choose from two different settings on your phone to control your roaming experience.

Press MENU/OK > Settings/Tools > Settings > More... > Roaming > Set Mode.

Select an option and press MENU/OK.

Table of Contents